Home Virtuemart Vehicle X-ray Scanners Occupied Vehicle Mobile X-ray Security Screening System


Occupied Vehicle Mobile X-ray Security Screening System

Description

The Linescan AutoVan is a completely self-contained mobile x-ray security screening system designed for use at various locations where temporary high security is required.

The 990mm (39.00") wide by 800mm (31.50") high tunnel opening is large enough to accept boxes, packages, and crates, yet is adequate for screening briefcases, handbags and other small items.

The x-ray/conveyor system in the Linescan AutoVan may be operated with either 110 VAC or 220 VAC line current or power can be supplied from the built-in 6KVA gasoline powered motor generator.

The Linescan AutoVan incorporates new state-of-the-art electronics offering outstanding reliability and maintainability as well as superior x-ray imaging.

Advanced features include high resolution monitors, simplified electronics packaging, and a new, durable control panel. Many features previously optional are now standard.

FEATURE HIGHLIGHTS

Driving at highway speeds.

Integral power unit allows full operation at remote location for over 8 hours.

Built-in batteries recharged whenever unit is in operation allows electric start of auxiliary power unit.

System can be refueled without need for APU cool down.

Unit will operate on AC/mains (110 or 220) or on built-in power unit

STANDARD FEATURES

Standard with single monitor

Variable gamma (color and black & white)

Pseudo color

Edge Trace

High penetration

Reverse monochrome

Suspicious luggage alert

Zoom 2x and 4x

Automatic threat alert

Area threshold alert

Air conditioning

Optional Features

E-Scan® with dual monitors, Inorganic and Organic Stripping are standard

3 or 4 color palette

Lights and siren

"CE Mark" Compliance Kit

Technical Specifications

Resolution: 38 gauge wire guaranteed, 40 gauge wire typical

Penetration: 27mm (1.1") steel guaranteed

Contrast Sensitivity: At least 20 levels visible as measured by a step wedge

Dose per inspection: Standard 0.05mR typical, E-Scan® 0.1mR typical

Tunnel Opening: 990mm (39.00") wide x 800mm (31.50") high. Because of the two dimensional sensor, any item which can be passed through the tunnel opening will be scanned and imaged regardless of orientation and without corner cut off.

Power Requirements: 105-125 VAC, 60Hz (15 amp max)

210-250 VAC, 50Hz (8 amp max)

Conveyor Speed: 0.3 m per sec (60 feet per min) @ 60Hz

0.25 m per sec (50 feet per min) @ 50Hz

Airborne Noise Level: <70db a="" p="">

X-Ray Source

Voltage: 160kVp

Tube Current: 1.0mA

Filtering: 5mm Al

Duty Cycle: 100%

Cooling: Sealed oil bath

Beam Orientation Vertically Downward

X-Ray Sensor

800 (1600 E-Scan®) photo diodes in folded array (L-shaped) configuration.

DIGITAL MEMORY

Digital memory unit:

Standard: 1024 x 1024 x 8

E-Scan®: 1024 x 1024 x 16

Levels of gray: 256

Physical Specifications

Van(Ford) E350 RV Cutaway with Dual Rear Wheels, 7.5L Fuel Injected V-8 Diesel Engine

Weight: Approx.4536 kg (10,000 lbs)

Environmental

Operating Temperature: +0°C (32° F) to 40°C (104° F)

Storage Temperature: -40°C (-40° F) to 70°C (158° F)

Humidity: 95% non-condensing

VIDEO DISPLAY

14" or 15" SVGA high resolution, low radiation, ergonomic, flicker free display. E-Scan®: additional 14" or 15" SVGA color display

HEALTH & SAFETY

Standard Features

Standard with single monitor

Variable gamma (color and black & white)

Pseudo color

Edge Trace

High penetration

Reverse monochrome

Suspicious luggage alert

Zoom 2x and 4x

Automatic threat alert

Area threshold alert

Air conditioning

Optional Features

E-Scan® with dual monitors, Inorganic and Organic Stripping are standard

3 or 4 color palette

Lights and siren

"CE Mark" Compliance Kit

Technical Specifications

Resolution: 38 gauge wire guaranteed, 40 gauge wire typical

Penetration: 27mm (1.1") steel guaranteed

Contrast Sensitivity: At least 20 levels visible as measured by a step wedge

Dose per inspection: Standard 0.05mR typical, E-Scan® 0.1mR typical

Tunnel Opening: 990mm (39.00") wide x 800mm (31.50") high. Because of the two dimensional sensor, any item which can be passed through the tunnel opening will be scanned and imaged regardless of orientation and without corner cut off.

Power Requirements: 105-125 VAC, 60Hz (15 amp max)

210-250 VAC, 50Hz (8 amp max)

Conveyor Speed: 0.3 m per sec (60 feet per min) @ 60Hz

0.25 m per sec (50 feet per min) @ 50Hz

Airborne Noise Level: <70db a="" p="">

X-Ray Source

Voltage: 160kVp

Tube Current: 1.0mA

Filtering: 5mm Al

Duty Cycle: 100%

Cooling: Sealed oil bath

Beam Orientation Vertically Downward

X-Ray Sensor

800 (1600 E-Scan®) photo diodes in folded array (L-shaped) configuration.

Digital Memory

Digital memory unit:

Standard: 1024 x 1024 x 8

E-Scan®: 1024 x 1024 x 16

Levels of gray: 256

Physical Specifications

Van(Ford) E350 RV Cutaway with Dual Rear Wheels, 7.5L Fuel Injected V-8 Diesel Engine

Weight: Approx.4536 kg (10,000 lbs)

Environmental

Operating Temperature: +0°C (32° F) to 40°C (104° F)

Storage Temperature: -40°C (-40° F) to 70°C (158° F)

Humidity: 95% non-condensing

Video Display

14" or 15" SVGA high resolution, low radiation, ergonomic, flicker free display. E-Scan®: additional 14" or 15" SVGA color display

HEALTH & SAFETY

Certified to comply with all published International Standards including the U.S. F.D.A., Center for Devices and Radiological Health Standards, for Cabinet X-Ray Systems (Federal Standard 21-CFR 1020.40).

Linescan was designed with the philosophy that external radiation should be as low as possible.

As a result, typical leakage radiation is less than 0.1 mR/hr.compared to maximum leakage of 0.5 mR/hr. permitted by the Federal Standard.

OPERATIONAL STANDARDS

Complies with all published International Standards including the U.S. Federal Aviation Administration Standards, "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26).

Design Policy

Pricing and Specifications are subject to change without notice.

Storage Temperature: -40°C (-40° F) to 70°C (158° F)

Humidity: 95% non-condensing

Video Display

14" or 15" SVGA high resolution, low radiation, ergonomic, flicker free display. E-Scan®: additional 14" or 15" SVGA color display

HEALTH & SAFETY

Certified to comply with all published International Standards including the U.S. F.D.A., Center for Devices and Radiological Health Standards, for Cabinet X-Ray Systems (Federal Standard 21-CFR 1020.40).

Linescan was designed with the philosophy that external radiation should be as low as possible.

As a result, typical leakage radiation is less than 0.1 mR/hr.compared to maximum leakage of 0.5 mR/hr. permitted by the Federal Standard. Operational Standards

Complies with all published International Standards including the U.S. Federal Aviation Administration Standards, "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26).

Design Policy

Pricing and Specifications are subject to change without notice.

Standard Features

Standard with single monitor

Variable gamma (color and black & white)

Pseudo color

Edge Trace

High penetration

Reverse monochrome

Suspicious luggage alert

Zoom 2x and 4x

Automatic threat alert

Area threshold alert

Air conditioning

Optional Features

E-Scan® with dual monitors, Inorganic and Organic Stripping are standard

3 or 4 color palette

Lights and siren

"CE Mark" Compliance Kit

Technical Specifications

Resolution: 38 gauge wire guaranteed, 40 gauge wire typical

Penetration: 27mm (1.1") steel guaranteed

Contrast Sensitivity: At least 20 levels visible as measured by a step wedge

Dose per inspection: Standard 0.05mR typical, E-Scan® 0.1mR typical

Tunnel Opening: 990mm (39.00") wide x 800mm (31.50") high. Because of the two dimensional sensor, any item which can be passed through the tunnel opening will be scanned and imaged regardless of orientation and without corner cut off.

Power Requirements: 105-125 VAC, 60Hz (15 amp max)

210-250 VAC, 50Hz (8 amp max)

Conveyor Speed: 0.3 m per sec (60 feet per min) @ 60Hz

0.25 m per sec (50 feet per min) @ 50Hz

Airborne Noise Level: <70db a="" p="">

X-Ray Source

Voltage: 160kVp

Tube Current: 1.0mA

Filtering: 5mm Al

Duty Cycle: 100%

Cooling: Sealed oil bath